Higher A/D conversion rate up to 200 times/seconds Higher accuracy of weighing scale-display resolution up to 1/15000 Dual display-showing both gross and net weight simultaneously The smallest batching controller, panel size is only 96mm x 48mm Weight indicator integrated with setpoint controller Provides complete material batching control function Controls up to 4 different kinds of materials All setpoints are keyed-in through front panel switches and stored in internal memory All setpoints values are protected even power down The batching result can be hold by function setting Condition for start operation is programmable by function setting Automatic tare condition is programmable by function setting Automatic zero return during power up is possible Tare check cycle is programmable by function setting Compare check cycle is programmable by function setting Compare inhibit timer is separated from coarse and fine interchange Re batch is possible if the actual batched value is less than the set point Dribble flow control is available for more accurate batching Easy access plug type connector is used Coarse feed, fine feed and free fall compensation Digital calibration method Software function setting method Batch report print out through RS232 or RS485 RS232/RS485 input can be used to set setpoint data and system function data Out of tolerance checking Discharge control is provide
Mains Supply
110V or 220V AC selectable, 50/60Hz
Power Consumption
9VA
Line Filter
Built -in
Operating Temperature
-10°C to 50°C (14°F to 122°F)
Relative Humidity
90%, non-condensing
Load Cell Type
All strain gauge type
Load Cell Supply
10V DC, 150mA max
Input Sensitivity
0.5mV/V to 2mV/V
Zero Point Adjustment
Range from 0.05mV to 15mV
Temperature Coefficient
Less than (0.0008% of reading + 0.3 digitals)/°C
Non-Linearity
Within 0.0067% of full scale
Conversion Rate
200 times/seconds
Scale Range
500 to 100,000
Step Width
1,2,5,10,20 or 50
Maximum Display Resolution
15,000 divisions
Number of Ingredients
4
Built in RS232/RS485 Port
2400, 4800, 9600 or 19200 baud selectable, 7 data bit, Even parity, 1 stop bit
