Electric Lubrication Pump for Concrete Mixer
HEG-2 type is the design and development of four export electric lubrication pump specifically for mixing station, mixing plant and other large twin shaft mixer shaft seal.
Features:
1. The lubrication system does not use traditional progressive distributor, but directly to the mixer shaft by four oil pump units;
2. Tubing using polycarbonate material, suitable for harsh environment conditions;
3. Four oil outlet port equipped with a pressure gauge, easy to observe the lubrication system is working properly, the timely detection of faults facilitates mixer running.
4. Each oil outlet of nominal flow 1.8cc / min, suitable for mixer shaft seal continuous lubrication oil supply requirements.
5. Operating temperature：-5℃ to 50 ℃
6.motor power：90w; 120w
7.Outlet size of Nozzle：Z1/4
8. Use grease：Mobil ep2；n1g1000#-2#
Technical Parameters：
CHANGING THE LUBRICATING OIL
Since the reduction gears have been designed not to consume oil, change the oil EVERY 4000
HOURS or at least EVERY 2 YEARS.
IMPORTANT:
When changing or refilling oil in the reductors, oil-pressure system and bearings, use the
type of oil shown in the table below, while for the refilling of the seals lubricating system
tank
