SICOMA TAG38 Discharge Gauge 3/8″
Introduction
The hydraulic plant is mainly used in the opening or closing of the silo door of the concrete and asphalt mixing plant. One end is equipped with a handle and a special manual pump device, which avoids the loss caused by the abnormal operation of the hydraulic oil pump due to special circumstances such as power failure. There are horizontal and vertical pump stations, and they are used with hydraulic universal oil cylinders. The hydraulic oil pump motor is usually 2.2KW, and the solenoid valve voltage is 24V and 220V.
Product Features
1. High-quality motor, stable operation and long service life.
2. Equipped with a uniquely designed shunt main body to ensure smooth oil circuit.
3. The output oil pressure can be adjusted by itself to ensure the normal operation of the equipment.
4. Equipped with a high-performance manual pump, which can be switched to manual operation during maintenance.
| NO | DESCRIPTION | QUANTITY | CODE |
| 1 | Electric Motor | 1 | M2502 |
| 2 | Joint | 1 | GCG01 |
| 3 | Monobloc | 1 | GCE01 |
| 4 | Plug for Oil 1/2” | 1 | GCE17 |
| 5 | Key | 1 | CON89 |
| 6 | Seal 3/8” | 2 | GCE18 |
| 7 | Oil Pipe | 1 | GCE06 |
| 8 | Screw M6X16 UNI5931 | 4 | VB025 |
| 9 | Seal OR114 | 2 | GCE52 |
| 10 | Screw 3/8” | 1 | GCE19 |
| 11 | Plain Washer D6 UNI6592 | 4 | RCO06 |
| 12 | Screw M6X20 UNI5931 | 4 | VB093 |
| 13 | Hand pump | 1 | POM44 |
| 14 | Screw M8X40 UNI5931 | 2 | VB007 |
| 14A | Screw M8X20 UNI5931 | 2 | VB005 |
| 15 | Seal | 1 | GCE24 |
| 16 | Oil tank | 1 | GCES1 |
| 17 | Level and temp detector | 1 | IH052 |
| 18 | Filter | 1 | FOC01 |
| 19 | Gear pump | 1 | POMP1 |
| 20 | Oil Pipe | 1 | GCE06 |
| 21 | Seal OR222 | 1 | GCE015 |
| 22 | Lock Washer M6 UNI6798 | 1 | RD006 |
| 23 | Seal OR445 | 1 | GCE04 |
| 24 | Nut M6 UNI5588 | 1 | DAD06 |
| 25 | Seal OR445 | 2 | GCE54 |
| 26 | Level Gauge 3/8” | 1 | TAO04 |
| 27 | Screw M8X35 UNI5739 | 4 | VE015 |
| 28 | Discharge Gauge 3/8” | 1 | TAG38 |
| 29 | Stirrup | 1 | GCE30 |
| 30 | Plain Washer M8 UNI6592 | 8 | RCO08 |
| 31 | Nut M8 UNI5588 | 6 | DAE08 |
| 32 | Screw M8X25 UNI5739 | 2 | VE010 |
| 33 | Plain Washer M8 UNI6592 | 4 | RCO08 |
| 34 | Screw M10X25 UNI5931 | 4 | VB011 |
| 35 | Selector | 1 | GCE59 |